WE WILL MATCH ANY PRICE!
Overview
The FL 9BW is a cooled CMOS camera designed for long exposure imaging. It not only incorporates high sensitivity and low noise advantages from latest sensor technologies, but also leverages Tucsen’s many years experiences on cooling chamber design and advanced image processing, being able to capture clean and even images for up to 60 minutes exposure time.
Long Exposure Imaging
The Dark current and the cooling depth are the key performance of long exposure imaging. The FL 9BW has the low dark current down to 0.0005 e- / p / s and the deep cooling depth down to -25℃ at ambient 22°C , which make it can acquire high SNR images within ~ 10 min, and has higher SNR in 60 min than the CCD.
Better Quantitative Capability
The FL 9BW integrates Sony's glow suppression technology and TUCSEN advanced image calibration technology to calibrate problems such as background glow and dead pixels, providing much cleaner background for quantitative analysis.
Latest BSI-CMOS Technology
The FL 9BW has the excellent imaging performance of modern CMOS technology. Not only the dark current is as low as the CCD, but also has the ultra-low light imaging capacity with 92 % peak QE and 0.9 e- readout noise, and the frame rate and the dynamic range are higher than 4 times that of the CCD.
Specification
| Model | FL 9BW |
| Sensor Type | BSI CMOS |
| Sensor Model | SONY IMX533CLK-D |
| Color/Mono | Mono |
| Array Diagonal | 15.96 mm (1”) |
| Effective area | 11.28 mm × 11.28 mm |
| Pixel Size | 3.76 µm × 3.76 µm |
| Resolution | 3000 × 3000, 9 MP |
| Peak QE | 92% @ 540 nm |
| Dark Current | < 0.0005 e-/p/s |
| Gain Mode | Gain 0 - High-Capacity | Gain 1 - Balanced | Gain 2 - Sensitive |
| Full well capacity | Gain0: 47 ke- @ bin1;
> 180 ke- with binning | Gain1: 16 ke- @ bin1;
> 64 ke- with binning | Gain2: 3 ke- @ bin1;
> 12 ke- with binning |
| Readout Modes | Standard, Low-Noise |
| Readout noise (Standard) | 3.2 e- @ Gain0 | 1.2 e- @ Gain1 | 1.0 e- @ Gain2 |
| Readout noise (Low-Noise) | 2.5 e- @ Gain0 | 1.0 e- @ Gain1 | 0.9 e- @ Gain2 |
| Frame Rate | 18 fps @ Standard Mode, 12 fps @ Low Noise Mode |
| Shutter Mode | Rolling |
| Exposure Time | 12.2 µs ~ 60 min |
| Image Processing | DPC |
| ROI | Supported |
| Binning | 2x2, 3x3, 4x4, 6x6, 8x8 |
| Cooling Method | Air |
| Cooling Temperature | Cooled to -25 °C @ Ambient temperature (22 °C) |
| Trigger Mode | Hardware, software |
| Output Trigger Signals | Exposure start, Global, Readout end, High level, Low level |
| Trigger Connector | Horise |
| SDK | C, C++, C# |
| Data Interface | USB 3.0 |
| Optical Interface | C-Mount, Customizable |
| Bit Depth | 14 bit @ bin1, Extended to 16 bit with FPGA binning |
| Power | 12 V / 6 A |
| Power Consumption | ≤ 40 W |
| Dimensions | 76 mm x 76 mm x 98.5 mm |
| Camera Weight | 835 g |
| Operating System | Windows / Linux |
| Operating Environment | Working: Temperature 0~40 °C, Humidity 10~85 % Storage: Temperature -10~60 °C, Humidity 0~85 % |
